Superior Glazes – Medium Green


Our “Superior Glazes” are our gloss glazes which are a non-toxic, effective and an economic way to cover large areas where one colour is being used. They are classified in three ways to indicate finished coverage: Opaque, Semi-Transparent, and Transparent.




Chrysanthos Superior Glazes add colour and gloss to ceramic ware in a single step. A large range of colours are available, they are all lead-free and depending on the colour are translucent, semi-opaque or opaque in their coverage. They provide a beautiful and practical means of giving solid colour coverage to broad areas or for highlighting decorative or incised ware.

Superior Glazes are for application to earthenware bisque and when fired correctly will seal and protect the ceramic ware from moisture and discoloration caused by contact with food and liquids.


Depending on the firing temperature two or three full coats required to achieve the best results. These are carefully applied at right angles to one another (ie. crosshatched), allowing each to dry in-between. A soft glazing brush should be used in order to minimise streaking. Besides brushing, Superior Glazes may also be sponged.

Superior Glazes are suitable for use in controlled glaze effects, for majolica techniques and are overglaze compatible.

Superior Glazes may be sprayed and thinned with clean water if necessary to improve glaze flow.


Chrysanthos Superior Glaze codes are suffixed by an opacity indicator “O” for opaque; “S” for semi-transparent and “T” for transparent.

Superior Glazes may be intermixed however it is not advised to mix Superior Glazes with Hobby Leaded Glaze as they are incompatible and the result will not be food-safe.

Superior Glazes are specifically formulated for application onto low fire earthenware clay that has been bisque fired between cone 04 (1,060°C) and cone 03 (1,101°C) then gloss fired to between cone 07 (984°C) and cone 03 (1,101°C).


SKU: SG155 Category: Tags: , , , ,
  • To be applied only on earthenware/low fire bisque
  • Using 2-3 coats to achieve desired coverage. Wait for coat to dry between applications
  • Colours are intermixable
  • Will bleed at inter-colour interface
  • Firing range between Cone 07 (984°C) – Cone 03 (1,101°C)
  • Finish: Opaque
  • Appropriate for functional ware (food safe) provided entire piece is covered in SG, has been fired correctly and used on compatible earthenware clay

140 mL, 500 mL


There are no reviews yet.

Be the first to review “Superior Glazes – Medium Green”

Your email address will not be published. Required fields are marked *